คุณยังไม่มีสินค้าในรถเข็น
External Covers Panels
| Pic No. | Parts ID | Parts Name | Link |
| 1 | RC2-0722-000CN | Right side cover - Provides acces to DIMMs - Located on the right side of the printer | Find 1 |
| 2 | RC2-0603-000CN | Right lower cover - Horizontal plastic cover - Mounts on the right lower side of the printer | Find 2 |
| 3 | RL1-1723-000CN | Right front cover - Vertical plastic cover - Mounts on the right side of the printer | Find 3 |
| 4 | RC2-0726-000CN | Fax cover - Mounts on the upper right side of the top cover assembly | Find 4 |
| 5 | RC2-0612-000CN | Engine controller cover - Vertical cover located on the right back side of the printer | Find 5 |
| 6 | RM1-3772-030CN | Top cover assembly - Mounts below the ADF and holds the paper when it?s printed | Find 6 |
| 6 | RM1-3772-000CN | Top cover assembly - Mounts below the ADF and holds the paper when it?s printed | Find 6 |
| 7 | RM1-3773-000CN | Left cover assembly - Protects the left side of the printer | Find 7 |
| 8 | RM1-3723-000CN | Multi-purpose input tray cover assembly - Includes pull-out and flip-out tray extensions | Find 8 |
| 9 | RM1-3724-000CN | Rear cover assembly - Includes rear door assembly | Find 9 |
| 10 | RM1-3722-000CN | Cartridge access door assembly - Provides access to the cartridges | Find 10 |
| 11 | RC1-4057-000CN | Tray hinge - Left side hinge for drop down tray 1 assembly | Find 11 |
| 12 | RC1-4058-000CN | Tray hinge - Right side hinge for drop down tray 1 assembly | Find 12 |
| 13 | RU5-2388-000CN | Tension spring - Provides tension for white plastic arm on left side of cartridge access door | Find 13 |
| 14 | RM1-1490-000CN | MP/Tray 1 support assembly - Hinged support and adjustable paper width guide assembly - Tray 1 cover assembly attaches to this assembly | Find 14 |
| 15 | RM1-3790-000CN | Stapler cartidge cover - Located on the right side of the printer | Find 15 |
| 16 | RC2-0729-000CN | Internal fax cover (fax rail) - Located next to the fax cover on the top cover assembly | Find 16 |
| 17 | RC2-0727-000CN | Stapler cartidge cover - Located on the right side of the printer - Replaces the stapler door for devices without staplers | Find 17 |
| 18 | RC2-0724-000CN | Paper clip tray - Small square tray were you can put the paper clips - Located on the right side of the printer next to the stapler. | Find 18 |
Internal components (1 of 6)
| Pic No. | Parts ID | Parts Name | Link |
| 1 | RC1-4055-000CN | Door arm - White plastic arm that connects to left side cartridge access door | Find 1 |
| 2 | RC1-4056-000CN | Door arm guide - White plastic guide for cartridge door lever | Find 2 |
| 3 | RC1-4128-020CN | Plastic duct that vents air from the lower right front fan to the laser/scanner. | Find 3 |
| 4 | WT2-5694-000CN | Snap-in cable clamp | Find 4 |
| 5 | RU5-2407-000CN | Tension spring - Provides tension for cartridge access door arm | Find 5 |
| 6 | RM1-1521-030CN | Laser/Scanner assembly - Mounts on top of print structure | Find 6 |
| 7 | RC1-4125-000CN | Laser shutter link - Enables the laser scanner shutter by pressing up this link on the underside of the laser/scanner assembly | Find 7 |
| 8 | RC1-4126-000CN | Reader holder cover - Plastic housing that covers cartridge E-label reader and holder assembly | Find 8 |
| 9 | RC1-4127-000CN | E-label reader holder - Housing that holds cartridge E-label reader | Find 9 |
| 10 | RU5-2404-000CN | Compression spring - Spring provides pressure to the laser shutter which when pulled back (spring is compressed) enables the laser scanner shutter by pressing up the plastic mechanical link on the underside of the laser/scanner assembly | Find 10 |
| 11 | RU5-2405-000CN | Compression spring - Provides pressure for E-reader holder | Find 11 |
| 12 | WT2-5812-000CN | Cable clip - 'C' shaped white plastic clip | Find 12 |
| 13 | XA9-1671-000CN | Screw - M3 X 8mm long | Find 13 |
| 14 | WT2-5056-000CN | Cable clip - 'C' shaped White plastic | Find 14 |
| 15 | RM1-4054-000CN | Contacts and cable - For toner cartridge memory tag - Connects to ECU memory control | Find 15 |
| 16 | RC2-0622-000CN | Fan holder - Chassis left fan holder | Find 16 |
| 17 | RC2-0623-000CN | Left plate fan shield - Holds the left side fan (FM2) | Find 17 |
| 18 | RK2-1499-000CN | Cooling fan (FM2) - Located on the left side of the printer - Small fan that cools the fuser assembly and print cartridge area | Find 18 |
| 19 | RA0-1003-000CN | Rubber foot - For bottom of printer - Three used | Find 19 |
| 20 | RC1-4009-000CN | Plate holder - Holds the left rear corner of the paper access plate (duplex pan) | Find 20 |
| 21 | RC1-4065-000CN | Grounding contact lever - Lever on left side that is moved by contact when the toner cartridge is installed | Find 21 |
| 22 | RC1-4066-020CN | Grounding contact lever - Lever on left side that pushes both contact springs against toner cartridge contacts on left side of cartridge | Find 22 |
| 23 | RC1-4067-000CN | Leaf spring - Leaf spring that provides electrical connection to left side of toner cartridge | Find 23 |
| 24 | RC1-4136-000CN | Protective plate | Find 24 |
| 25 | RC1-4137-020CN | Contact cam - Vertical piece that inserts into protective plate | Find 25 |
| 26 | RC1-4140-000CN | Compression spring - Provides pressure to grounding contact link on left side of cartridge guide - Pushes link arm away when cartridge is removed | Find 26 |
| 27 | RC2-0565-000CN | Cassette guide - Left side guide for media cassette | Find 27 |
| 28 | RC2-0566-000CN | Cassette guide - Left rear side cassette guide | Find 28 |
| 29 | RC2-0567-000CN | Center guide - Left center guide plate | Find 29 |
| 30 | RC2-0585-000CN | Left wing feed guide stopper | Find 30 |
| 31 | RC2-0705-000CN | Drive release lever | Find 31 |
| 32 | RC2-0703-000CN | Cartridge guide - Upper left side toner cartridge guide | Find 32 |
| 33 | RC2-0704-000CN | Cartridge guide - Lower left side toner cartridge guide | Find 33 |
| 34 | RC2-0706-000CN | Cartridge clamp lever - Attaches to upper left toner cartridge guide - Provides mechanical lock for toner cartridge | Find 34 |
| 35 | RC2-0707-000CN | Left cartridge stopper - Provided a predetermined position for the cartridge | Find 35 |
| 36 | RU5-2403-000CN | Tension spring - Provides tension for cartridge clamp lever that holds lefts side of cartridge in a stable position when inserted | Find 36 |
| 37 | RU5-2410-000CN | Torsion spring - Provides pressure to move protective plate back into cartridge compartment when the cartridge is removed | Find 37 |
| 38 | RG5-1928-000CN | Registration cable assembly - Includes 7P and 3P connectors | Find 38 |
| 38 | VS1-7177-003CN | Connector (3-pin) - ORDER RG5-1928-000CN | Find 38 |
| 39 | RC2-0725-000CN | Staple tray - Plastic support for paper while stapling - Attaches to stapler unit | Find 39 |
| 40 | RC2-0736-000CN | Metal face plate cover - For the formatter - Contains openings for external connections | Find 40 |
| 41 | RM1-4053-000CN | Laser scanner motor cable - Connects ECU to scanner motor (M3) | Find 41 |
Internal components (2 of 6)
| Pic No. | Parts ID | Parts Name | Link |
| 3 | RC1-4114-000CN | Cam - Located between large white 201-tooth gear and drive release lever | Find 3 |
| 4 | RC1-4115-000CN | Coupling lever - White plastic lever between large white gear cam and drive release assembly | Find 4 |
| 5 | RC1-4116-000CN | Drive release lever | Find 5 |
| 6 | RC1-4117-000CN | Drive release link - | Find 6 |
| 7 | RC2-0649-000CN | Fuser film drive side plate - Located on the fuser assembly | Find 7 |
| 8 | RC2-0590-000CN | Cartridge duct - Small vent duct to route air from the fan (FM1) to the cartridge area | Find 8 |
| 9 | RM1-3748-000CN | Duplexing pendulum assembly - Gear assembly that transfers power from main motor to run duplexing capability | Find 9 |
| 10 | RM1-1522-000CN | Drive release assembly - | Find 10 |
| 11 | RC2-0648-000CN | Air guide - Located next to the cartridge duct | Find 11 |
| 12 | RC2-0657-000CN | Fuser thrust stopper - Located on the fuser drive assembly | Find 12 |
| 13 | RC2-0701-000CN | Inner bushing - Rides on the large white 201-tooth drive gear | Find 13 |
| 14 | RU5-0962-000CN | Gear - 65-tooth gear | Find 14 |
| 15 | RK2-1489-000CN | Stepping DC motor (M2) - Drives all fuser rollers and fuser drive assembly | Find 15 |
| 16 | RM1-3746-000CN | Fuser drive side plate and gear assembly - Drive gear assembly and mounting plate for fuser - Located on right side of printer | Find 16 |
| 17 | RU5-0950-000CN | Gear - 201-tooth gear | Find 17 |
| 18 | RU5-0956-000CN | Gear - 20/20 tooth - Goes on the fuser drive assembly | Find 18 |
| 19 | RU5-0957-000CN | Gear - 20-tooth - Goes on the fuser drive assembly | Find 19 |
| 20 | RU5-0958-000CN | Gear - 17/17 tooth - Goes on the fuser drive assembly | Find 20 |
| 21 | RU5-0959-000CN | Gear - 19-tooth - Goes on the fuser drive assembly | Find 21 |
| 22 | RU5-2401-000CN | Compression spring - Provides pressure for the large 201-tooth white gear on right side of printer | Find 22 |
| 23 | RU5-0394-000CN | Gear - 12-tooth Gear - Goes on the drive release assembly | Find 23 |
| 24 | RU5-2920-000CN | Compression spring - Goes on the pendulum assembly | Find 24 |
| 25 | XD2-1100-402CN | Retaining ring (E-type) | Find 25 |
| 26 | XA9-1671-000CN | Screw - M3 X 8mm long | Find 26 |
| 27 | RC1-4108-000CN | Cover for main motor M1 - Located on lower right side of printer | Find 27 |
| 28 | RC2-0579-000CN | Gear cover - Mounts on the left side of the printer chassis | Find 28 |
| 29 | RC2-0652-000CN | Plain Washer - Located on the pendulum assembly | Find 29 |
| 30 | RK2-1488-000CN | Main motor (M1) - DC motor located on the upper left side of the printer | Find 30 |
| 31 | RU5-0951-000CN | Gear - 16-tooth gear | Find 31 |
| 32 | RU5-0955-000CN | Gear - 42-tooth - Goes with the pendulum assembly | Find 32 |
| 33 | RU5-0960-000CN | Gear - 31-tooth gear | Find 33 |
Internal components (3 of 6)
| Pic No. | Parts ID | Parts Name | Link |
| 1 | RC1-0922-000CN | Roller bushing - Right side transfer roller bushing | Find 1 |
| 2 | RM1-1508-000CN | Transfer roller assembly - Long metal shaft with black roller - Includes right side bushing and tension spring | Find 2 |
| 3 | RC1-0939-000CN | Multi-purpose/tray 1 separation pad - Does not include holder | Find 3 |
| 4 | RC1-3935-000CN | Feed guide assembly - Mounts above transfer roller assembly | Find 4 |
| 5 | RC1-3936-020CN | Registration roller assembly cover | Find 5 |
| 6 | RC1-3937-000CN | Separation pad holder | Find 6 |
| 7 | RU5-0400-000CN | 12-tooth gear - On left side of registration roller assembly | Find 7 |
| 8 | RC1-4027-000CN | Sensor lever - Top of page sensor flag - Used to detect edge of paper | Find 8 |
| 9 | RC1-4025-000CN | Static charge eliminator - Comb that mounts above upper delivery roller that dissipates static charge as paper exits printer | Find 9 |
| 10 | RC1-4028-000CN | Torsion spring - Provides tension for top of page sensor flag | Find 10 |
| 11 | RC1-4059-000CN | Torsion spring - Tiny spring that attaches to small metal U-shaped cartridge grounding contact - Rear cartridge contact spring | Find 11 |
| 12 | RC1-4060-000CN | Grounding contact - Tiny U-shaped metal cartridge grounding contact - Contacts copper grounding strip on left side of toner cartridge | Find 12 |
| 13 | RC1-4061-000CN | Torsion spring - Tiny spring that attaches to small metal U-shaped cartridge grounding contact - Front cartridge contact spring | Find 13 |
| 14 | RL1-0568-000CN | Tray 1/MP tray pickup roller - D-shaped replacement pickup roller | Find 14 |
| 15 | XA9-1671-000CN | Screw - M3 X 8mm long | Find 15 |
| 16 | RC1-4069-000CN | Sheet static charge - Goes on the lower transfer guide assembly - Dissipates static charge from paper | Find 16 |
| 17 | RC1-4070-000CN | Sheet static charge - Dissipates static charge from paper | Find 17 |
| 18 | RU5-2408-000CN | Compression spring - Right side transfer roller spring - Provides tension for transfer roller | Find 18 |
| 19 | RC1-4189-000CN | Gear stopper - Small bushing between right side of registration assembly and registration roller drive gear | Find 19 |
| 20 | RM1-3715-000CN | Registration roller assembly | Find 20 |
| 21 | RM1-3716-000CN | Multi-purpose tray pickup roller assembly - Includes pickup roller, roller cam, right and left cams, both round rollers and dowel pin | Find 21 |
| 22 | RM1-3757-000CN | Lower transfer guide assembly - Guides paper into transfer roller | Find 22 |
| 23 | RU5-2385-000CN | Compression spring - Provides pressure for tray 1 seperation pad | Find 23 |
| 24 | RC2-0575-000CN | Arm paper - Includes sensor | Find 24 |
| 25 | RC2-0576-000CN | Torsion spring - Provides tension to the arm paper | Find 25 |
| 26 | RM1-4057-000CN | Cable harness - For paper delivery sensor and fuser thermistors | Find 26 |
| 27 | RA0-1172-000CN | 17-tooth gear assembly - Includes the 17-tooth gear mounted on a black plastic lever/bracket | Find 27 |
| 28 | RC2-0483-000CN | Compression spring | Find 28 |
| 29 | RU5-0409-000CN | Registration roller gear - Mounts on the end of the registration roller - 14-tooth gear | Find 29 |
| 30 | RU5-0366-000CN | Gear - 30-tooth - Attaches to right side end of tray 1 pickup roller shaft | Find 30 |
| 31 | XB4-7401-005CN | M4 pan-head phillips screw with self-tapping threads - 10mm long | Find 31 |
Internal components (4 of 6)
| Pic No. | Parts ID | Parts Name | Link |
| 1 | RM1-3760-000CN | Paper feed guide assembly | Find 1 |
| 2 | RC1-4096-000CN | Guide assembly - Duplexer portion paper input guide assembly | Find 2 |
| 3 | RM1-3759-000CN | Lower paper feed assembly - Vertical transfer unit - Transfers paper from pickup assembly up to the printer input | Find 3 |
| 4 | RM1-3758-000CN | High voltage power supply PC board assembly | Find 4 |
| 5 | RM1-1506-000CN | Position guide assembly - Guides the paper along the right side duplex path - Attaches just above power supply | Find 5 |
| 6 | RM1-4040-000CN | Top sensor printed circuit board (PCB) assembly (PS-901) - Top of page sensor, detects pick, delivery and stationary | Find 6 |
| 7 | RM1-4042-000CN | Paper width sensor - Printed circuit board (PCB) assembly | Find 7 |
| 8 | RC1-4085-000CN | Grounding plate - High voltage power supply grounding plate - Attaches to left rear of power supply | Find 8 |
| 9 | XB4-7401-005CN | M4 pan-head phillips screw with self-tapping threads - 10mm long | Find 9 |
| 10 | XB2-7300-605CN | Machine screw with attached washer - M3, 6mm - Used to hold plastic to metal | Find 10 |
Internal components (5 of 6)
| Pic No. | Parts ID | Parts Name | Link |
| 1 | RK2-1490-000CN | Solenoid (SL1) - For tray 1 - Mounts on the main drive assembly | Find 1 |
| 2 | RM1-3714-000CN | Gear - Pick up roller gear assembly | Find 2 |
| 3 | RM1-1485-000CN | Roller assembly - Black plastic housing that holds rollers in front of tray 2 pickup roller assembly | Find 3 |
| 4 | RU5-2386-000CN | Torsion spring - Provides tension for tray 1 paper sensor flag | Find 4 |
| 5 | RC2-0588-000CN | Cable holder - Mounts on the main drive assembly | Find 5 |
| 6 | RC2-0593-000CN | Fan rod - Metal rod that mounts against fan (FM1) on right side of printer - Used for noise reduction | Find 6 |
| 7 | XA9-1671-000CN | Screw - M3 X 8mm long | Find 7 |
| 8 | WT2-5694-000CN | Snap-in cable clamp | Find 8 |
| 9 | XA9-1503-000CN | M3 truss head (Flanged) phillips screw (Black oxide finish) - 6mm long | Find 9 |
| 10 | WT2-5678-000CN | Cable clip - White plastic push-in clip with mounting pin | Find 10 |
| 11 | RM1-4041-000CN | Multipurpose paper tray sensor - Printed circuit assembly (PCA) - Includes paper sensors (PS3) | Find 11 |
| 12 | RC2-0592-000CN | Main fan holder - Plastic fan holder for main cooling fan (FM1) - Located on the upper right side of the printer | Find 12 |
| 13 | RK2-1497-000CN | Cooling fan - Located on the right side of the printer | Find 13 |
| 14 | RC1-3939-000CN | Paper sensor lever - Mechanical device that activates photo sensor (PS902) - For tray 1 | Find 14 |
| 15 | RC1-4083-000CN | Paper guide - Located under the registration roller assembly | Find 15 |
| 16 | RM1-3762-000CN | Paper pick-up assembly - Includes the pickup roller, feed roller assembly, drive gears, and plastic housing | Find 16 |
| 17 | RM1-3740-000CN | Fusing assembly - Bonds toner to paper by heat - For 110VAC to 127VAC operation | Find 17 |
| 17 | RM1-3740-030CN | Fusing assembly - For 110-127 VAC - Bonds toner to paper by heat | Find 17 |
| 17 | RM1-3717-000CN | Fusing assembly - For 110-127 VAC - Bonds toner to paper by heat - Includes 20-tooth gear | Find 17 |
| 18 | RM1-3761-000CN | Fusing assembly - For 220 VAC to 240 VAC - Bonds toner to paper with heat - Includes 20-tooth gear | Find 18 |
| 18 | RM1-3741-000CN | Fusing assembly - For 220 VAC to 240 VAC, 50Hz operation - Bonds toner to paper by heat | Find 18 |
| 18 | 5851-3997 | Fusing assembly - For 220 VAC to 240 VAC operation - Bonds toner to paper with heat | Find 18 |
| 18 | RM1-3741-030CN | Fusing assembly - For 220 VAC to 240 VAC operation - Bonds toner to paper with heat | Find 18 |
| 19 | RM1-3712-000CN | Main drive assembly - Mounts on the right side of the printer - Metal plate with gears attached - Also known as main gear drive assembly | Find 19 |
| 20 | RC2-0739-000CN | Sensor cable cover - Plastic cover that protects the face up sensor cable | Find 20 |
Internal components (6 of 6)
| Pic No. | Parts ID | Parts Name | Link |
| 1 | RC2-0631-000CN | Power on/off switch - Located on the front right side of the printer | Find 1 |
| 2 | WT2-5678-000CN | Cable clip - White plastic push-in clip with mounting pin | Find 2 |
| 3 | RM1-3727-000CN | Bottom support plate for the roller assembly | Find 3 |
| 4 | RK2-0534-000CN | Microswitch - Door open switch (SW501) | Find 4 |
| 5 | RA0-1003-000CN | Rubber foot - For bottom of printer - Three used | Find 5 |
| 6 | RC2-0702-000CN | Right cartridge stopper - Provided a predetermined position for the cartridge | Find 6 |
| 7 | VS1-7257-007CN | Drawer connector - Connector located on top of tray assembly frame (right side), which connects tray assemblies to each other | Find 7 |
| 8 | WT2-5056-000CN | Cable clip - 'C' shaped White plastic | Find 8 |
| 9 | XA9-1671-000CN | Screw - M3 X 8mm long | Find 9 |
| 10 | RC1-3665-000CN | Shaft bushing/retainer - Small plastic cylinder with four nubs that twist - Locks into the side frame | Find 10 |
| 11 | RC2-0665-000CN | Torsion spring - Tiny spring that attaches the face down roller | Find 11 |
| 12 | RC2-0697-000CN | Face-up shield plate | Find 12 |
| 13 | VS1-7177-003CN | Connector (3-pin) - ORDER RG5-1928-000CN | Find 13 |
| 14 | WG8-5624-000CN | Photo-sensor (TLP1241) - Sensor flag activated | Find 14 |
| 15 | RM1-1497-000CN | Delivery roller assembly - Lower face-down output roller assembly - Includes roller and holder Four used | Find 15 |
| 16 | XB4-7401-005CN | M4 pan-head phillips screw with self-tapping threads - 10mm long | Find 16 |
| 17 | RC2-0632-000CN | Switch holder - Holds the power on/off switch | Find 17 |
| 18 | RC2-0633-000CN | Link switch - Metal arm that links power switch to power supply | Find 18 |
| 19 | RC2-0634-000CN | Link switch holder - Plastic guide that holds power link arm in place | Find 19 |
| 20 | RC2-0595-000CN | Holder - Plastic assembly that holds interlock switch for cover | Find 20 |
| 21 | RC2-0468-000CN | Right lower cushion - Located on the button of the printer - Small black foam rubber rectangle shaped pad | Find 21 |
| 22 | RC2-0492-000CN | Cartridge guide - Right side toner cartridge guide | Find 22 |
| 23 | RC2-0498-000CN | Solenoid Mount | Find 23 |
| 24 | RC2-0559-000CN | Cassette guide - Right side guide for media cassette | Find 24 |
| 25 | RC2-0560-000CN | Cassette guide - Right rear side cassette guide | Find 25 |
| 26 | RC2-0561-000CN | Right center side plate guide | Find 26 |
| 27 | RC2-0561-000CN | Right center side plate guide | Find 27 |
| 28 | RC2-0700-000CN | Cartridge guide - Lower right side toner cartridge guide | Find 28 |
| 29 | RM1-3749-000CN | Face-down output roller assembly - Black roller shaft with four soft rollers | Find 29 |
| 30 | RK2-1492-000CN | Solenoid (SL2) - Controls paper pickup roller for tray 2 | Find 30 |
| 31 | RM1-4062-000CN | Option input tray cable | Find 31 |
Tray 2 pickup assembly
| Pic No. | Parts ID | Parts Name | Link |
| 1 | RM1-3762-000CN | Paper pick-up assembly - Includes the pickup roller, feed roller assembly, drive gears, and plastic housing | Find 1 |
| 2 | RM1-3763-000CN | Pick up roller assembly - Tray 2 pickup roller assembly | Find 2 |
| 3 | RM1-3769-000CN | Sensor flag assembly for tray 2 - Short rod with one flag on it - Mounts next to the pickup roller assembly | Find 3 |
| 4 | RM1-4060-000CN | Cable assembly - For tray 2 paper pickup sensor | Find 4 |
| 5 | RL1-1370-000CN | Paper pickup roller - Picks up media from the paper input tray | Find 5 |
| 6 | WG8-5624-000CN | Photo-sensor (TLP1241) - Sensor flag activated | Find 6 |
